Home Removal Services Blog

Thinking about insulating your attic? Do you know what insulation is best for you? These are things that you need to know before you start with your attic insulation. Picking the right insulation is very simple to do, and installing it is not complicated either.

If you want a long lasting and very effective insulation, foam insulation is one of the best, but it is harder to install and therefore it must be installed by a professional. Foam insulation is also a bit more expensive than the other methods because it offers the highest R value in insulation and is also the longest lasting method of insulation.

Before buying your insulation it is highly recommended to measure your attic and the buy a little bit more than needed just in case, unopened packs can always be sent back to the shop. By measuring before you can also see what type of insulation is better for your attic space. Buying a cover for your insulation will stop any damage or condensation to your insulation. Brown Kraft paper or fire-retardant foils are two very good choices.

Installing attic insulation is a very simple job that one person can complete in the space of a weekend if fitted in a proper manner. Start at one end of the attic, making sure you put weight onto open joists. Start placing the batts or unroll the insulation between the joists. Butt down the rolls making sure not to butt them very hard as not to damage the insulation, the same is done with the batts. Use the utility knife to cut away remaining fibers and any areas that touch electrical items as not to cause a fire.

Before beginning the installation of your attic insulation, make sure you have all of the utilities needed. Long gloves, respirator, knife, goggles or glasses, and long sleeved clothes and pants are some of the necessary utilities to prevent irritation that the fiberglass can cause.

This is a step by step guide for an easy way to install attic insulation in your home. There are two types of insulation for attics, the first being very hard to install and must be done by a professional installer and is called loose fill. For a simple do it yourself installation of your attic insulation it is recommended to use the blanket form, which can be sold in rolls or batts.

Rolls of insulation normally come in all different sizes between sixteen and twenty four inches and are sized to fit in between joists and studs. Batts are sold in flat packs and are normally about eight feet long in size. Both are made up by either fiberglass or mineral fibers.

Measure your attic before buying your insulation and by doing this you will guarantee that you will have all the necessary insulation. If your attic is already partly insulated then make sure that the insulation does not have to be changed or has been damaged in any way. Covers are also available for the top of your insulation to prevent any damage to it. Depending on the type of insulation you buy, you can choose the necessary cover for it.

The installation itself is a very simple process that can be fully completed in just a few days if done effectively and properly. Always start at one side of the attic and weigh down the joists, if they are open, with either a heavy object or your feet. Place or unroll the insulation slabs making sure they are in the joists. Knock down the ends with care so that the insulation slab will not split. Cut away any edges that overlap, using the utility knife. Make sure any wires are uncovered so that they will not short circuit in the future.

Being well prepared before commencing the installation of your attic insulation is highly recommended by experts. Make sure your body face, ayes and hands are fully covered so that the fiber glass will not touch your skin, as it can cause a bad irritation.